标准资料网-标准资料免费资源平台

【英文标准名称】:Rollerchainsandfittedcogwheelsgearing-Selectionforaerospaceuse.
【原文标准名称】:滚子传动链和配合的嵌齿轮传动机构.航空航天用选择
【标准号】:NFL36-711-1974
【标准状态】:现行
【国别】:法国
【发布日期】:1974-08-01
【实施或试行日期】:1974-08-12
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:规范;质量(物质);航空运输;名称与符号;飞行器设备;齿(切削工具);滚子链;尺寸;测量重锤;飞行器部件;链轮;链传动;齿轮参数;齿数;齿;尺寸公差;断裂荷载
【英文主题词】:
【摘要】:
【中国标准分类号】:V22
【国际标准分类号】:21_220_30;49_035
【页数】:4P;A4
【正文语种】:其他


Product Code:SAE J960
Title:Marine Control Cable Connection--Engine Clutch Lever
Issuing Committee:Marine Technical Steering Committee
Scope:The purpose of this SAE Recommended Practice is to provide guides toward standard conditions for operating marine hydraulic transmissions where push-pull cable control is applicable.For control cable information see SAE J917.a. Provide suitable detents at forward, neutral, and reverse positions. Approximately 22 N (5 lb) of cable force are required to move the engine clutch lever out of the detent positions.b. Provide an engine clutch lever with a 6.35 mm (1/4 in) diameter hole at a radius to provide 70 mm (2 3/4 in) linear travel from forward to reverse, with neutral at the center.c. The engine clutch lever (at 6.35 mm [1/4 in] diameter hole) to have 6.35 mm (1/4 in) maximum thickness.Common cable terminals used are ball joints, clevises, and pivots.d. Provide clear cable path to engine clutch lever.e. Provide choice of cable paths from different angles. This can be done by providing a sector type of lever with a series of holes equidistant from the centerline of the shaft. It can also be done by having the engine clutch lever repositionable on the engine clutch control shaft.f. Provide bracket support near the engine clutch control shaft. This can be a hub, bolt holes, bolt, or other means for use for attaching a cable anchor bracket. A bolt pattern concentric with the engine clutch control shaft is desirable.